Digital proximity sensor with Sinking NPN or Sourcing PNP output (HP)
Non-contact magnetic sensor proximity switch produces a digital output. The output produced by Hall-Effect Proximity Switch sensor switches between logic low (operate point) and logic high (release point) with presence and absence of a magnet as a target. The difference between the magnetic operate and release points is called the hysteresis of the device. The built-in hysteresis circuitry allows clean switching of the output even in the presence of external mechanical vibration and electrical noise.
 
Product Specification Range
A. Electrical Performance
 
1. Supply Voltage:
(Vcc)
Standard 4.5 VDC to 24 VDC
Optional: 5.5VDC to 36VDC
2. Target: Permanent magnet, with customer long Range Sensing
3. Airgap: 0.005" To 0.750" (0.126mm to 19.035mm)
4. Output Signal: NPN Open collector with 4.7k ohms internal pull-up Resistor (Digital TTL Compatible).
Optional: No pull-up resistor, PNP (sourcing) output.        
5. Output Voltage: Low= 400mV Max at 10mA Sink current
High= Follows Vcc
Optional: Low= 400 mV Max, High=5 VDC
7. Supply Current: 10mA Max
8. Output Saturation Voltage: 400mA Max
9. Output Current:
(I sink)
50mA continues operation
Optional: 50mA Max
10. Output Leakage Current: 10uA Max.
11. Output Rise Time: 1.00us Max
12. Output Fall Time: 1.00us Max.
13. Magnetic Operate Point(Bop): 180 Gauss Nom.
14. Magnetic Release Point(Brp): 140 Gauss Nom.
15. Magnetic Hysteresis(Bh): 40 Gauss Nom.
16. Switching Frequency: DC to 200KHZ
17. Protection: Reverse Polarity, -50 V Reverse, Load Dump: 60V
Optional: EMI, EMC, Input Transient, and Short circuit protection.
18. Operating Temperature: -4° F to +221° F (-20°C to 105°C)
Optional: -40°F to +302°F (-40°C to 150°C)
 
B. Industry / Application

  All automation systems in general

Machine tools, Robotics, Automation safty instruments.

Automotive Engine speed measurement
Dynamometer
Crankshaft
Gear box
Speed sensor
Power generator Motor speed measurement
Turbine flow measurement
Exercise equipments Counting, and position sensing
Pharmaceuticals Food processing
Off-Highway  
Printer Industry  
 
C. Features and Benefits
  • Non- Contact
• Drive Capability up to 10 TTL Load
• Customize for most environments

Analog (Linear) 0 - 5 VDC Position Sensors (HL)
Non- contact magnetic sensors that are designed to respond to a wide range of positive or negative magnetic fields and can sense relatively small changes in a magnetic field. By having magnet as a target, this unit produces a Ratio-metric Rail-To-Rail linear output. It also has an internal amplifier to boost the output to a higher level. These sensors are ideal for applications such as magnetic flux measurement, displacement, and linear output rotary measurement.
 
Product Specification Range
A. Electrical Performance
1. Supply Voltage:
(Vcc)
Standard 4.5 VDC to 6 VDC Max.
Optional: 5.5VDC to 36VDC.
2. Target: Permanent magnet, with customer long Range Sensing
3. Airgap: 0.005" To 0.750" (0.126mm to 19.03mm)
4. Output Voltage Linear, 0 t0 5 VDC (2.5 VDC  TYP. at 0 Gauss)
Optional : Linear, 0 t0 10 VDC (5 VDC TYP. at 0 Gauss)
5. Sensitivity: 1.30 mV/G Max
7. Supply Current: 14 mA Max
8. Output Current: 10 mA
9. Bandwidth: 23KHZ Typ.
10. Operating Temperature: -4°F to +185°F (-20°C to +85°C)
Optional: -40°F to +302°F (-40°C to 150°C)
B. Industry / Application
 

Automotive:  Linear/ Rotary counting

Lab Test equipment: Flux measurement
Machine Tools: Distance measurement
All Automation systems in General. 
C. Features and Benefits
  • Non- Contact
• No moving parts
• Customize for most environments

Analog (Linear) 0 - 10 VDC Position Sensors (HL)
Non- contact magnetic sensors that are designed to respond to a wide range of positive or negative magnetic fields and can sense relatively small changes in a magnetic field. By having magnet as a target, this unit produces a Ratio-metric Rail-To-Rail linear output. It also has an internal amplifier to boost the output to a higher level. These sensors are ideal for applications such as magnetic flux measurement, displacement, and linear output rotary measurement.
 
Product Specification Range
A. Electrical Performance
1. Supply Voltage:
(Vcc)
Standard 4.5 VDC to 6 VDC Max.
Optional: 5.5VDC to 36VDC.
2. Target: Permanent magnet, with customer long Range Sensing
3. Airgap: 0.005" To 0.750" (0.126mm to 19.03mm)
4. Output Voltage Linear, 0 t0 5 VDC (2.5 VDC  TYP. at 0 Gauss)
Optional : Linear, 0 t0 10 VDC (5 VDC TYP. at 0 Gauss)
5. Sensitivity: 1.30 mV/G Max
7. Supply Current: 14 mA Max
8. Output Current: 10 mA
9. Bandwidth: 23KHZ Typ.
10. Operating Temperature: -4°F to +185°F (-20°C to +85°C)
Optional: -40°F to +302°F (-40°C to 150°C)
B. Industry / Application
 

Automotive:  Linear/ Rotary counting

Lab Test equipment: Flux measurement
Machine Tools: Distance measurement
All Automation systems in General. 
C. Features and Benefits
  • Non- Contact
• No moving parts
• Customize for most environments



Automotive




Aerospace



Defense



Railways




EnergY


Medical / BiotecH





Catalogue :